E-vent Visual T 150MM Fan with Timer - 5077

PRODUCT DESCRIPTION:

Home axial E-vent Visual fan with timer has an ultra-thin front plate and is suitable for wall and ceiling mounting. It is made of high quality, easy to clean white plastic - PP material. The protection of the product is IPX4. The E-vent Visual EPE fan is designed for the transportation of clean air with a maximum temperature of 50°C.

Description of timer function:

The timer can be set between 30 seconds and 30 minutes. The fan can be connected, for example, to a switch which controls light. After the light in the room is switched off, the fan runs for a set time (eg 5 minutes). The timer is located on the board (printed circuit board) under the cover on the front of the fan. The time interval is set using a timer that is part of the PCB. Note: all our timer fans have a safety fuse. Therefore, if you start the fan with a separated switch (not together with the light), it will have a delay of approx. 3 - 5 seconds. It is necessary to keep the switch in "on" position before the fan starts. This is for practical reasons. If you have two switches next to each other, one for the light and the other for the fan, this delay will prevent the fan from starting unintentionally.

Fan with timer wiring diagram :

Supplied in diameters: 150 mm.

All types have an extended warranty of 36 months.

ENGINE:

Single-phase asynchronous motor has plain bearings with a constant grease filling for the entire service life.

USE:

The fan is ideal for short air ducts or for wall ventilation. Use for ventilation of toilets, bathrooms, kitchens or cellars, as well as common interiors.

PRODUCT ASSEMBLY:

The fan is equipped with a mounting ring for easy installation. It can be mounted on both the wall and the ceiling.