Heating Elelement 225 x 65 mm cm for Electrolux AEG Zanussi Washing Machines - 1327242309

Washing machine heating element 225 x 65 mm (1327242309) – AEG Zanussi

The heating element 225 × 65 mm with a power of approximately 2000 W is a reliable original spare part designed for AEG, and Zanussi washing machines. This element is made of stainless steel and equipped with a hole for the NTC sensor, which guarantees a long service life even with intensive household use. Modern materials such as EPDM seals reliably prevent water leakage and ensure economical water heating during the wash cycle. 🔧

Benefits and use: If your washing machine does not heat water or displays a heating error, the most common cause is a defective heating element. Timely replacement of this part not only ensures rapid water heating, but also protects against unnecessary program extensions and higher energy consumption. Thanks to the precise dimensions of 225 x 65 mm and the code 1327242309, installation is simple and compatibility with all listed models is guaranteed. ⚡

Technical parameters
Part code: 1327242309
Type: Heating element with hole for NTC sensor
Dimensions: 225 × 65 mm (22.5 × 6.5 cm)
Power: ≈ 2000 W / 230 V
Material: Stainless steel, EPDM seal
Sensor hole diameter: 8 mm
Manufacturer: AEG / / Zanussi
EAN: 8757521801648
Product origin: AfterMarket
Assembly instructions 🛠️
Any more skilled user can install the heating element. Before starting work, always disconnect the washing machine from the electrical network and turn off the water supply. Remove the back cover of the appliance, disconnect the wires and loosen the center nut. Gently tap the screw to loosen the old body and pull it out of the water block. Install the new body with the gasket evenly seated, tighten the nut and connect the wires to the corresponding terminals. After installation, run a test wash program without laundry to verify tightness and proper functionality. If you are unsure of the procedure, we recommend contacting a professional service. 🧰

Safety instructions ⚠️
Always disconnect the washing machine from the mains and water before installation!
Do not touch the electrical terminals with wet hands.
Use only the seals and sensors recommended by the manufacturer.
After installation, check the tightness and proper grounding of the appliance.
If you are unsure about the installation, entrust the installation to a professional.
Compatible appliances
The heating element 1327242309 is suitable for selected AEG, and Zanussi models:

AEG L6FBI48SC
AEG L7FBE48SC
EW6F528W
EW6S526C
Zanussi ZWF01483WH
Zanussi ZWQ61226CI
AEG LTX7E272C
EWF12853
Zanussi ZWF81463W
AEG L6SE26BI