Duct Plastic Fan with Timer E-vent Line EPK 10T

PRODUCT DESCRIPTION:

Home duct axial fan with timer, made of high quality, easy-to-clean, antistatic white ABS material. The protection of the product is IPX4. The E-vent EPK fan is designed for the transportation of clean air with a maximum temperature of 50°C. 

Description of timer function:

The timer can be set between 30 seconds and 30 minutes. The fan can be connected, for example, to a switch by which lighting is controlled. After the light in the room is switched off, the fan runs for a set time (eg 5 minutes). The timer is located on the board (printed circuit) under the cover on the front of the fan. The time interval is set via a timer which is a part of the printed circuit. Note: all our timer fans have a safety fuse. Therefore, if you start the fan with a separate switch (not together with the light), they will have a delay of approx. 3 - 5 seconds. It is necessary to keep the switch in the closed state before the fan starts. This is for practical reasons. If you have two switches next to each other, one for the light and the other for the fan, this delay will prevent the fan from starting unintentionally.

Fan wiring diagram with timer:

Supplied diameters: 100MM.

All types have an extended warranty of 36 months.

ENGINE:

Single-phase asynchronous motor with plain bearings with a constant grease filling for the entire lifetime.

USE:

The fan is ideal for short air ducts, max. 1.5 meters long, with a small pressure drop or for ventilation through the wall. Use for ventilation of toilets, bathrooms, kitchens or cellars, pantries, but also common interiors.

PRODUCT ASSEMBLY:

The fan can be mounted in any position, it can be mounted both on the wall and on the ceiling. It slides into the pipe or into the wall.